Trending Floors repairs hardwood floors across Metro Atlanta: deep scratches, gouges, damaged or loose boards, pet stains, squeaks and water damage. We are based in Lawrenceville and serve Atlanta, Alpharetta, Johns Creek, Sandy Springs, Roswell and Gwinnett County. Every repair starts with a free in-home inspection and a written estimate, and we match the repaired area to the rest of your floor.
Hardwood floor problems we repair
- Deep scratches, dents and gouges that sanding and refinishing alone will not remove.
- Damaged, cracked or stained boards, replaced individually and woven into the existing floor so the repair blends in. Learn how this works in our guide to hardwood floor lacing.
- Pet stains that have soaked deep into the wood fibers.
- Loose, squeaky or soft spots, which often point to a problem with the subfloor underneath. See our subfloor repair guide.
- Water damage: cupping, buckling and staining after leaks or flooding. Read what to do after water damage.
- Gaps between boards caused by seasonal humidity changes.
How much does hardwood floor repair cost in Atlanta?
Repairs are priced after we see the floor, because cost depends on the size of the damage, the wood species and whether the repaired area needs to be refinished to match. Typical Metro Atlanta ranges:
- Repairing minor water damage (drying plus refinishing): about $5 to $10 per square foot
- Replacing water-damaged hardwood boards: about $9 to $16 per square foot installed
- Small wood subfloor repair (under 20 sq ft): about $213 to $1,023
- Mid-size subfloor replacement (50 to 80 sq ft): about $800 to $2,500
Repairing is usually far cheaper than replacing the whole floor. If your floor mainly needs a fresh surface, hardwood floor refinishing typically costs $3 to $8 per square foot.
Our hardwood floor repair process
- Inspection: we find the cause of the damage, check moisture levels and measure board thickness.
- Fix the cause: loose subfloor, leaks or moisture are addressed first so the damage does not come back.
- Repair or replace boards: damaged boards are cut out and replaced with matching wood, woven into the surrounding floor.
- Sand and blend: the repaired area is sanded flush with the rest of the floor.
- Stain and finish: we match the stain color and sheen so the repair is hard to spot.
Repair, refinish or replace?
Repair fixes specific damaged areas. Refinishing renews the whole floor’s surface and removes scratches and wear. Replacement is the better choice when boards are too thin from past sanding, still cupped because a moisture problem was never fixed, deeply stained across large areas, or soft and rotten. We check every floor first and tell you honestly which option makes sense. If you need new floors, we also install hardwood and engineered hardwood.
Frequently asked questions
Can you replace just a few hardwood boards?
Yes. Damaged boards can be cut out and replaced individually with matching wood, then sanded and finished to blend with the rest of the floor.
Will the repaired area match the rest of my floor?
We match the wood species, board width, stain color and sheen. Older floors that have changed color with age sometimes need the whole room refinished for a perfect match; we will tell you before starting.
Can water-damaged hardwood be saved?
Often, yes, if the leak is fixed and the wood is dried quickly. Mild cupping can flatten after professional drying and then be sanded and refinished. Boards that stay cupped, buckle or turn black usually need replacement.
Why does my hardwood floor squeak or feel soft?
Squeaks usually come from boards or subfloor panels that have loosened from the joists. Soft spots can mean moisture damage in the subfloor. Both should be inspected before refinishing.
Which areas do you serve?
We are based in Lawrenceville and repair hardwood floors across Gwinnett County, Alpharetta, Johns Creek, Sandy Springs, Roswell and Atlanta. Call (404) 944-2548 or book a free consultation.
[…] Need damaged hardwood fixed? See our hardwood floor repair service in Atlanta. […]