We install radiant heated flooring systems for bathrooms across Metro Atlanta, giving you warm floors underfoot no matter the season. Heated flooring pairs seamlessly with tile, stone, or LVP, adding comfort and value to any bathroom renovation.
A heated floor for a typical master bathroom (60 to 80 sq ft) costs about $800 to $1,800 fully installed with an electric mat or cable system and thermostat, plus standard tile installation. Running it 2 to 3 hours a day adds roughly $15 to $25 a month to your electric bill. We install heated floors under tile, stone and LVP across Metro Atlanta.
We install electric radiant heating systems beneath your bathroom floor, providing even, consistent warmth. Our team handles subfloor prep, heating mat or cable placement, and thermostat wiring so the system performs reliably for years.


Whether you’re installing tile, stone, or luxury vinyl, our Atlanta team ensures your chosen flooring is fully compatible with radiant heat, so you get both the look you want and consistent warmth underfoot.
Our installers place and test every heating element before flooring goes down, checking for even heat distribution and proper thermostat function — so you’re not left with cold spots or callbacks.

Adds comfort and value to any bathroom, especially in colder months.


Book a free estimate and find out how heated flooring can transform your bathroom’s comfort.
Please reach us at trendingfloorsllc@gmail.com if you cannot find an answer to your question.
Heated bathroom flooring uses a radiant heat system installed beneath the finished floor. Most residential systems use thin electric heating cables or mats laid across the subfloor, which are then covered by tile, stone, or another flooring material. A thermostat controls the system, warming the floor surface evenly from below rather than heating the air in the room.
Tile, stone, and LVP are common compatible options. Tile and stone conduct heat especially well, making them the most popular choice for radiant systems, while LVP can also be used with the right underlayment and system type.
A heated floor installation as part of a bathroom renovation typically adds one to two days to the project timeline, on top of however long the flooring installation itself takes, since the heating system needs to be tested before flooring goes down over it.
Electric radiant floor heating in a single bathroom is generally a modest addition to a home’s energy use, since it’s typically run on a timer or thermostat for limited hours rather than continuously, and only heats one room. Actual impact depends on system size, usage habits, and local electricity rates.
For a master bathroom of 60 to 80 sq ft, about $800 to $1,800 complete with an electric radiant system and thermostat. Larger areas such as a mudroom (80 to 120 sq ft) run about $900 to $2,200, and a kitchen (200 to 300 sq ft) about $2,000 to $5,000. Tile installation over the system is priced at standard tile rates, and a dedicated electrical circuit ($200 to $600) is added when needed.
A single bathroom heated 2 to 3 hours a day typically adds about $15 to $25 a month in electricity.
Electric radiant systems are most common under tile and stone, and can also be used under compatible LVP. We confirm the right system for your floor during the free in-home visit.
We are based in Lawrenceville and install heated bathroom floors across Gwinnett County, Alpharetta, Johns Creek, Sandy Springs, Roswell and Atlanta. Call (404) 944-2548 for a free estimate.